Updating bios on asus
Basically it may weaken solder contacts and with reflow you can fix it. Hope this help someone who need some info." Sorry for my English (google translator). Only need to press the power button for a minute or more. It worked for my notebook Asus Q550L, but I suspect all about Asus UEFI boot.
We’ve tested the tool using the online mode and the BIOS was updated successfully, so we must mention once again that it’s very important to follow the steps provided by the manufacturer.
Basically, it offers multiple updating modes, including an online one or through a downloaded file, but both of them should work just fine.
The interface is not quite eye-candy but it was not really supposed to be since the role of the whole application is to perform this difficult task as safely and efficiently as possible, not to look nice and be of no use.
Then try to turn on the device using only the charger ( do not attach the battery). Otherwise, open up the bottom casing of your laptop where you can see Hard drive and RAM units. If it didn't work either, then it may be the RAM slots causing this problem. The start screen appeared so I was able to eliminate any problem with the screen itself. (Read temp profile for chip for more accurate info) 8.
This problem is related to RAM units First you should turn off your device, unplug the charger and remove the battery Then hold the power button for at least 30 seconds. I disconnected the hard drive then booted up the laptop. Isolated this chip by covering other electronic components by using alufoil with capton tapes. Heated GPU using hot air gun by monitoring the temperature. Needed to heat it up to 220deg celcius and maintain it for 1-2min.